Difference between revisions of "Talk:Gun Spread Formula"

Jump to navigation Jump to search
2,152 bytes added ,  18:30, 22 June 2009
imported>Mannon
imported>Henning
Line 269: Line 269:


[[User:Mannon|Mannon]] 02:41, 1 June 2009 (UTC)
[[User:Mannon|Mannon]] 02:41, 1 June 2009 (UTC)
== How "Min Spread" works ==
Apparently most people think Min Spread is the minimum spread of the bullets (i.e. Min Spread of 2.0 means that the bullets will deviate at least 2.0 degrees).
At least that's what's written on the Weapons page, and if read correctly I think some people made the same assumption in their comments on discussion page here.
I just tested this theory, and with a Min Spread of 20 I still have bullets hitting very close to the middle (i.e. where my crosshair is aiming). (NOTE: my small guns skill is 71). However, most bullets have spread so large that they completely miss the target (from what I could tell, the spread sometimes seemed close to 45 degrees, but I did not measure it, this is only a quick observation).
I think Min Spread is actually the AVERAGE spread of the bullets.
To test this, I changed the Min Spread setting of my weapon from 20 to 45. I ended up with bullet impacts at nearly 90 degrees on the ceiling, the floor and the walls on the side.
I think it works like this: if Min Spread is 20, bullets my spread anywhere between 0 and 40 degrees. Why? Because 20 is right in the middle of 0 and 40.
If Min Spread is 45, bullets may spread anywhere between 0 and 90 degrees.
If Min Spread is 0.5, bullets may spread a minimum of 0 and a maximum of 1.0 degrees.
And so on for any value of Min Spread.
Basically:
Real minimum spread = 0
Maxmimum spread = Min Spread x 2
This makes sense since the game needs a way to decide the maximum spread a bullet may have.
NOTE: the real bullet spread of a weapon is probably affected by other factors, such as small guns skill, bonuses, agility, perks, and so on. Here I am not considering such factors as I only wish to explain how Min Spread works (I am not trying to find the complete spread formula).
For example, with a small guns skill of 70 I did not have any bullets hitting at exactly 90 degrees, but the bullets which had the biggest spread angle during testing had a spread angle close to 90 degrees. Therefore I assume that other factors have a minor effect on bullet spread, however such effect seems small to my observations.
Hope this helps.
Anonymous user

Navigation menu